XCMG Official Compact Motor Grader Gr1803 180HP Used Tractor Road Wheel Motor Grader Price

• Customization: Available
• Specification: 8900x2625x3420mm
• Trademark: XCMG
• Model NO.: GR1803
• HS Code: 8401200000
• Production Capacity: 10/Year

Product Description

XCMG Official Compact Motor Grader GR1803 180hp Used Tractor Road Wheel Motor Grader Price

The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Energy saving and noise reduction
Adopt low speed engine transmission line, low fuel consumption and energy saving and environmental protection; The transmission system is equipped with low speed ratio, and the average fuel consumption is reduced by about 8%. Three levels of engine, cab and seat vibration reduction; The cab is supported by six points; Deceleration of engine, cooling fan with large diameter, sound absorption sponge inside the hood, good sealing of the cab reduces noise of the whole machine.

Advantages and highlights:

1.Offer Test Report of Professional Institute.
2.Details Of Maintenance And Repair Items Included.
3.Price Concessions. 
4.Official Factory Sourcing. 
5.Reconditioning Directly From XCMG. 
6.Vehicle Condition of Perfection.
7.XCMG Official Endorsement.
8.SGS Provides The Third-Party Inspection Certificate.
 

Item			GR1803
Basic parameters	Engine model		SC7H190.1G3
	Rated power/speed		140kW/2000rpm
	Overall dimension (standard)		8900x2625x3420mm
	Total weight (standard)		15400 kg
	Tire specification		17.5-25
	Ground clearance (front axle)		430mm
	Tread		2156mm
	Space of front and rear axles		6219 mm
	Space of middle and rear wheels		1538 mm
Performance parameters	Forward velocity		5/8/11/19/23/38km/h
	Reverse speed		5/11/23km/h
	Tractive effort f=0.75		≥79 kN
	Maximum gradeability		≥25%
	Tire inflation pressure		260kPa
	Working system pressure		20MPa
	Transmission pressure		1.3-1.8Mpa
Working parameters	Maximum steering angle of front wheel		±48°
	Maximum slant angle of front wheel		±17°
	Maximum oscillating angle of front axle		±15°
	Maximum oscillating angle of equilibrium box		±15°
	Maximum steering angle of frame		±27°
	Minimum turning radius		7.3m
	Scrape knife	Maximum lift height	400mm
		Maximum cutting depth	500mm
		Maximum tilt angle	90°
		Cutting angle	28°-70°
		Angle of revolution	360°
		Length & chord height	3660x610mm