XCMG Official GR100 Mini Tractor Road Motor Grader.
The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Advantages and Highlights:
1. GR100 adopts famous Brand 4BTA3.9-C100-II (SO11847) turbocharged diesel engine with large output torque and power reserve coefficient and low fuel consumption.
2. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
3. The drive axle is a dedicated XCMG axle.
4. Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.
5. The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.
6. The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.
Product Parameters
| Basic specification |
| Engine model |
4BT3.9 |
| Rated power/speed |
75/2400kw/rpm |
| Dimension(LxWxH) |
6880×2375×3150mm |
| Operating weight(Standard) |
7000kg |
| Performance specification |
| Travelling speed ,forward |
5,10,20,39km/h |
| Travelling speed ,reverse |
8,25km/h |
| Tractive force(f=0.75) |
41.6KN |
| Max. gradeability |
20% |
| Tire inflation pressure |
350KPa |
| Working hydraulic pressure |
16MPa |
| Transmission pressure |
1.3~1.8MPa |
| Operating specification |
| Max. steering angle of front wheels |
±50° |
| Max. lean angle of front wheels |
17° |
| Max. oscillation angle of front axle |
±15° |
| Max. oscillation angle of balance box |
|
| Frame articulation angle |
±27° |
| Min. turning radius using articulation |
5.9m |
| Biade |
| Maximum lift above ground |
300mm |
| Maximum depth of cutting |
350mm |
| Maximum blade position angle |
45° |
| Blade cutting angle |
28°-70° |
| Circle reversing rotation |
120° |
| Moldboard width X height |
3048×500mm |
Product Show
Company Profile
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
Audited Supplier 
){kind=link}