XCMG Dg68 Aerial Platform Fire Truck.
DG68 Aerial Platform Fire Truck is a multi-function fire truck with combined boom, which is driven hydraulically and controlled electrically and can slew fully.It is widely used in applications for fire-fighting on high-rise and super high-rise buildings in big cities.
DG68 Aerial Platform Fire Truck 's max. working height is up to 68 m and rated down reach is 13.73 m. The platform has a rated load capacity of 400kg, and max. working radius is 23 m. Five-axle Benz chassis with ultralow cab is adopted. The gross vehicle weight is 48 t. Outrigger beam is telescoped in two stages. Seven-section boom comprises two-stage telescoping boom (1st stage of 4 sections and 2nd stage of 3 sections). Control system is a variable displacement pump constant pressure system based on CAN Bus. Many advanced technologies such as servo proportional control, PLC and multi-media dynamic indication are employed, consequently smooth movement of boom is ensured and inching control is gained. Perfect multi-layer protection system is formed by 25 safety devices and intelligent fault diagnosis system is available.
DG68 combines functions of aerial fire-fighting, rescue of people and emergency rescue. It has good maneuverability, wide working range and powerful capacity for fire-fighting and rescuing people.
I. Main technical features of DG68
1. Benz Actros 5041/10×4 special chassis: with ultralow cab, two-axle for driving and three-axle for steering, air suspension is adopted for the 5th axle. 16-forward speed and 2-reverse speed, max. speed is not less than 90Km/h. 6-cylinder V type turbocharged intercooler engine with power of 300Kw complies with China national III emission standard. The chassis has features of large carrying capacity, powerful driving force and good maneuverability. CAN control technology, ABS and automatic shift transmission, as well as function of intelligent gear shift, intelligent cruise and intelligent maintenance are available.
2. Powerful fire-fighting capacity: outstanding main operating parameters and fast speed.
3. Dedicated PLC, digit setting and adjustment of control signal and operating characteristic curves suitable for various demands. Due to automatic speed decrease and stop function for extreme position, movement shock of actuating element is avoided and maneuverability is improved, consequently reliability and safety are obtained.
IIII. Main technical data tables of DG68
Table 1 Main technical data in travel configuration
| Category |
Item |
Unit |
Parameter |
| Dimension |
Overall length |
mm |
15060 |
| Overall height |
mm |
4000 |
| Overall width |
mm |
2500 |
| Wheel space |
1st axle-2nd axle |
mm |
1700 |
| 2nd axle-3rd axle |
mm |
3400 |
| 3rd axle-4th axle |
mm |
1350 |
| 4th axle-5th axle |
mm |
1350 |
| Weight |
Curb weight |
48050 |
1st, 2nd axle |
kg |
16000 |
| 3rd, 4th axle |
kg |
24700 |
| 5th axle |
kg |
7350 |
| GVW |
48200 |
1st, 2nd axle |
kg |
16240 |
| 3rd, 4th axle |
kg |
24620 |
| 5th axle |
kg |
7340 |
| Power |
Engine model |
|
OM501LA.III/17 |
| Engine power/rotation speed |
kw/r/min |
300kw/1800rpm |
| Travel |
Max. travel speed |
Km/h |
≥85 |
| Min. turning diameter |
m |
≤24 |
| Approach angle |
° |
9 |
| Departure angle |
° |
9 |
| Braking distance (at 30km/h) |
m |
≤9.5 |
| Min. ground clearance |
mm |
331 |
| Max. grade ability |
% |
≥25% |
Table 2 Main technical data for operation
| Category |
Item |
Unit |
Parameter |
| Main performance |
Rated working height |
m |
68 |
| Max. working radius |
m |
23 |
| Max. down reach |
m |
13.2 |
| Platform rated load |
kg |
400 |
| Outrigger span (longitudinal lateral) |
m |
7.635×7.0 |
| Elevating range of No.1 boom |
° |
1~84 |
| Elevating range of No.2 boom |
° |
-74~74 |
| Speed |
Time for deploying boom |
s |
≤200 |
| Time for deploying outriggers |
s |
≤30 |
| Fire fighting performance |
Fire monitor |
Rated flow |
L/s |
50 |
| Rated pressure |
MPa |
0.8 |
| Rated reach |
m |
≥70 |
| Monitor travel |
° |
Below/above horizontal: -45~90
Leftwards/ rightwards: ±90 |
Product Show
Company Profile
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
Audited Supplier 
){kind=link}