XCMG Xmr403s 4t Light Vibratory Double Road Rollers.
XMR403s is a light vibratory roller with operating weight of 4 tons. This machine is suitable for surface and edge compaction construction for asphalt engineering, cement engineering and So on, also suitable for sub-base and base, sand and gravel material compaction work, is the idealist compaction machinery for all sorts of parking lot construction, road, sidewalks and bikeway compaction, as well as a variety of road maintenance engineering.
Performance Characteristics:
* Closed hydraulic drive system is adopted to realize stepless speed change.
* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.
* The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.
* Large ground clearance and curb clearance, strong trafficabilit, good edge compaction performance.
* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.
* High frequency vibration and excitation force design, high working efficiency, good compaction effect.
* This machine has also the air intake preheating function, can realize low temperature cold start.
* Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.
* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ºC.
Product Parameters
| Type |
Unit |
XMR403s |
| Operating weight |
kg |
4100 |
| Static linear load(front/rear) |
N/cm |
157/157 |
| Travel Speed |
km/h |
0-10 |
| Theoretical agreeability |
% |
30 |
| Min. turning radius(Inner/Outer) |
mm |
2932/4232 |
| Min ground clearance |
mm |
350 |
| Steering angle |
± ° |
30 |
| Swing angle |
±° |
10 |
| Vibration frequency |
Hz |
60 |
| Vibrating system-max.pressure |
Mpa |
20 |
| Steering system-max.rressure |
Mpa |
14 |
| Nominal amplitude |
mm |
0.41 |
| Exiting force |
kN |
42 |
| Compacting width |
mm |
1300 |
| Drum diameter |
mm |
800 |
| Engine Model |
|
ZN490Q |
| Rated engine speed |
r/min |
2600 |
| Rated engine power |
kW |
35.5 |
| Engine oil consumption |
g/kW.h |
220 |
| Overall dimensions(L*W*H) |
mm |
2720*1416*2776 |
| Wheelbase |
mm |
1920 |
| Water tank capacity |
L |
220 |
| Fuel tank capacity |
L |
66 |
| Hydraulic tank capacity |
L |
52 |
Product Show
Company Profile
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
Audited Supplier 
){kind=link}