| Customization: | Available |
|---|---|
| After-sales Service: | Overseas Service Center Available |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Specifications | ||
| Engine | Model | SC11CB240,1G2B1 | |
| Type | Water cooling,4xstrokes | ||
| Air breathing | Thrbo-changed | ||
| Number of cylinders | 6 | ||
| Bore | 120mm | ||
| Piston dispiacement | 10.5l | ||
| Governor | Electronic variable-speed governor | ||
| Power | 175kw(240hp) | ||
| Rated speed | 2200rpm | ||
| Fuel system | Direct injection | ||
| Maximum torque | 950Nm/1400rpm | ||
| Lubrication system | Gear pump forced lubrication | ||
| Filter | Full-flow type 1 | ||
| Air filter | Dry(double filter elements with dust exhanst and indicator) | ||
| Gearbox | Hydraulic torque converter | type | Single stage,single phase,three-components |
| types | Fixed shaft drive shifting | ||
| km/h(Galculated on the tire 29.5R25) | |||
| Gear 1(Forward/Rearward) 6/6 | |||
| Gearbox | Gear 2(Forward/Rearward) 11/11 | ||
| Travel speed | Gear 3(Forward/Rearward) 22/22 | ||
| Gear 4(Forward/Rearward) 34/34 | |||
| Axle and main drive | Drive system | 4 WD | |
| Front wheels | Fixed | ||
| Rear wheels | Oscillating axle,±12º swing | ||
| Reduction gear | Spiral bevel gear | ||
| Differential gear | Common gear | ||
| Final drive | Planetary gear,1st class speed reduction | ||
| Brake | Service brake | Gas cap oil disc brake(4W) | |
| Parking brake | Drum type brake | ||
| Emergency brake | With parking brake as dual purpose | ||
| Item | Specifications | ||
| Steering control system | Type | Hinged joint,full hydraulic power steering | |
| Turning angle | 38º in two directions | ||
| Minimum turning radius(Calculated as the center of outward wheel) | 6063mm | ||
| Hydraulic system | Steering system | Hydraulic pump | Gear pump |
| Maximum flow | 168L/min | ||
| Safety valve pressure setting | 16MPa | ||
| Steering cylinder | Type | Dual-action piston | |
| Number of cylinders | 2 | ||
| Bore x stroke | 90mm×442mm | ||
| Loading control | Hydraulic pump | Gear pump | |
| Rated flow | 380 L/min | ||
| Safety valve pressure setting | 20MPa | ||
| Working cylinder | Type | Dual-action piston | |
| Number of cylinders-bore x stroke | |||
| Movable arm | 2-170 mm×828mm | ||
| Rotating bucket | 1-200 mm×593mm | ||
| Control valve | Single handle | ||
| Control position | Movcble arm | Lifting,holding,lowering and fioating | |
| Rotating bucket | Tilting bsck,holding and duping | ||
| Working time of cylinder | Lifting | ≤6.0S | |
| Dumping | <0.9S | ||
| Lowering(empty bucket) | 4s | ||
| Refilling capacity | Cooling system | 65L | |
| Fuel tank | 300L | ||
| Engine | 28L | ||
| Hydraulic system | 200L | ||
| Drive axle(each) | 36(dry)/70(wet) | ||
| Gearbox | 28L | ||
| Standard movable arm | High unloading movable arm | |||
| Standard bucket | Bucket | Standard bucket | Bucket | |
| 3.5m³ | 5.5m³ | 3.5m³ | 5.5m³ | |
| Bucket capacity:Stack loading | 3.5 | 5.5 | 3.0 | 4.5 |
| Flat loading | 3.0 | 4.5 | 3.0 | 4.5 |
| Width of bucket | 3000 | 3500 | 3000 | 3500 |
| Weight of bucket | 1540 | 2108 | 1540 | 2108 |
| Maximum dumping height at 45° inclination | 3200 | 3180 | 3720 | 3700 |
| Dumping distance at 45°inclination under maximum dumping height | 1268 | 1282 | 1340 | 1360 |
| Lengths of bucket rod stretching-out and bucket extension | 4420 | 4450 | 4760 | 4790 |
| Working height(height-rising) | 5640 | 5800 | 6180 | 6240 |
| Total length | 8740 | 8600 | 9100 | 9000 |
| Turning circumference | 7178 | 7340 | 7360 | 7510 |
| (Distance from the transport position where the bucket is located to the lateral angle of bucket) | ||||
| Digging depth:0° | 80 | 80 | 80 | 80 |
| 10° | 240 | 250 | 240 | 250 |
| Item | Specifications | Unit |
| Rated bucket capacity | 3.5 | m³ |
| Rated operating load | 6000 | kg |
| Operation mass | 20000 | kg |
| Max.horse power | 171 | kN |
| Max.breakout force | 201 | kN |
| Hydraulic cycle time-raise | 6 | s |
| Total cycling time | 10.9 | s |
| Tire type | 23.5-25-20PR | |
| Dimension(L×W×H) | 8740×3020×3550 | mm |
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
){kind=link}