| Customization: | Available |
|---|---|
| Certification: | TUV, ISO, RoHS, CE |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm- lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
Advantages and Highlights:
1. GR135 adopt Dongfeng cummins 6BT5.9-C130- II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.
2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start
protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.
3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.
4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.
5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.
| Description | Unit | Parameter value | |
| Engine model | Cummins 6BT5.9-C130-2 | ||
| Rated power/speed | kw(r/min) | 97(2200) | |
| Overall dimension (standard) | 8015X2380X3050 | ||
| Total weight (standard) | kg | 11000 | |
| Tire specification | 13.00-24 | ||
| Ground clearance (front axle) | mm | 515 | |
| Tread | mm | 2020 | |
| Space of front and rear axles | mm | 5780 | |
| Forward velocity | km/h | 5/8/13/20/30/42 | |
| Reverse speed | km/h | 5/13/30 | |
| Tractive effort f=0.75 | kN | 61.3 | |
| Maximum gradeability | % | 20 | |
| Tire inflation pressure | kPa | 300 | |
| Working system pressure | MPa | 16 | |
| Transmission pressure | MPa | 1.3-1.8 | |
| Maximum steering angle of front wheel | ±49° | ||
| Maximum slant angle of front wheel | ±17° | ||
| Maximum oscillating angle of front axle | ±15° | ||
| Maximum oscillating angle of equilibrium box | ±16° | ||
| Maximum steering angle of frame | ±27° | ||
| Minimum turning radius | m | 6.6 | |
| Scrape knife | Maximum lift height | mm | 410 |
| Maximum cutting depth | mm | 515 | |
| Maximum tilt angle | 90° | ||
| Cutting angle | 54°-90° | ||
| Angle of revolution | 360° | ||
| Length & chord height | mm | 3048x610 |
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
){kind=link}